Old Braces, Drills, Levels, Rules, Shaves for sale

Woodworking Planes,  and other tools

I will list here some tools I have for sale.Whenever possible, I'll link a photo or scan. I can always send you a pic of one of the tools I have not posted a pic for. Some of these tools are located at my retail shop listed at the bottom of this page, so it might take a few days before I can go get them.

If you have questions, you can send an e-mail to me at toolman@gatctools.com.
Any suggestions will be appreciated and carefully considered.

Note: Shipping will depend on size and weight.  USPS Flat Rate boxes work well for smaller items, especially multiple small items.  Larger items will be shipped via USPS Priority Mail.  I will send you an estimate of the total cost to the best of my ability.

If you wish to pay by check or money order,
send it payable to:
Walt Lane, 3 Pewter Lane, Johnstown, NY 12095.

 

Last updated:  April 10, 2019

This is a very long page.  Please keep scrolling down to see:

Braces, Drills, Gauges, Levels, Planes, Rules, Shaves, Squares, and Others

 


Braces and Bits  

26BB - Brace, No. 1322, 10-inch sweep, by Millers Falls,
in Good++ condition.
This premium model made with full ratchet, spring jaws,
and ball bearing head,
accepts both Jennings and Irwin  pattern bits.
{price = $28.00 plus shipping}  z
      Pic

9W561 - Brace, No. 732, 10-inch sweep, by Millers Falls,
in Good++ condition.
This premium model made with full ratchet, spring jaws,
and ball bearing head,
accepts both Jennings and Irwin  pattern bits. Very clean
{price = $28.00 plus shipping}  z     Pic

55HB01 - Brace, No. 923 10-inch sweep, by Stanley,
in Good+ condition.
This premium model made with full ratchet,
spring jaws,
and ball bearing head,

accepts both Jennings and Irwin  pattern bits.
{price = $28.00 plus shipping} z       Pic  


55HB07 - Hollow Auger, unmarked, in Good+ condition.
{price = $15.00 plus shipping}lf      Pic

23BA-4 - Hollow Auger, marked 5/8", Unmarked (looks like a Stearns),
in Good+ condition.
{price = $24.00 plus shipping}  z     Pic     Pic

25BB-4 - Hollow Auger, 1/4" to 1 1/4", by the B.S.V. Co.,
in Good+ condition.
{price = $38.00 plus shipping}  lf     Pic     Pic

23BS-6 - Dowel Pointer, no gauge, unmarked, in Good+ condition.
{price = $24.00 plus shipping} lf     Pic

25BB-8 - Dowel Pointer, with depth gauge, unmarked,
in good+ condition.
{price = $34.00 plus shipping} lf     Pic     Pic 

 


Drills

 

 

23BB - Breast Drill, 16", #85, by Millers Falls, in Good+ condition.
{price = $43.00 plus shipping}  lf     Pic     Pic

22FY  -   Hand Drill No. 1530 by Yankee, in Good+ condition.
{price = $33.00 plus shipping} lf      Pic     Pic

33CM-3 - Hand Drill, unmarked by maker, in Good+ condition. 
Striping is about 50%.  Drill spins freely.
{price = $23.00 plus shipping}  lf     Pic
  

26BD-3 - Folding Beam Drill, unmarked by maker, with slides to fold
the drill down for transport. 
All is in good+ condition. 
I will include three drill bits for starters.
{price = $165.00 plus shipping}  z     No pic


 

Gauges, Marking and Mortise  

 

26BG-1 - Mortise Gauge #77, by Stanley (marked Pat 10, 22, 1872),
in Good+ condition.
{price = $43.00.00  plus shipping}  lf     Pic

26BG-2 - Mortise Gauge (in stye of #78), unmarked by maker,
in Good+ condition.
{price = $28.00 plus shipping}  lf     Pic

55HG01 - Gauge, Butt #93 (T-1), by Stanley, in Good+ condition.
{price = $40.00 plus shipping}  lf      Pic  

55HG05 - Gauge, Marking #162, by Stanley, in Good+ condition.
This gauge is marked "No. 162")
{Price = $30.00 plus shipping}   lf      Pic  

25BG-1 - Slitting Gauge (9"), unmarked, in Good+ condition.
{price = $23.00 plus shipping}  lf     Pic     Pic  

31RM - Gauge, Clapboard No. 89, by Stanley, in Good+ condition.
{price = $25.00 plus shipping} lf       Pic  

Hey Walt, I received the tools today. That mortising gauge is even cooler than I expected.
Thanks again the 9 and a half is quite lovely. Thank you for the super fast shipping and careful packaging as well.
Take care.  N. S.  1/7/16


Levels  

 

17MBA - Level, Bit & Square No. 44, by Stanley, in Good+ condition
{price = $43.00 plus shipping} lf     Pic 

33CL-1 - Level 10", by Disston & Morss, in Good condition
with some dings and scratches.
{price = $23.00 plus shipping}  lf     Pic     Pic



 


 

Planes and such  

 

                          Two booths at the Antique Center   

32CVU - Plane, Block, by Sears Roebuck & Co, in original box
with plane catalogue from 1950's.
{price = $28.00 plus shipping} z    Pic

26BP-4 - Plane, Block #506, by Sargent, in Good+ condition.
{price = $25.00 plus shipping}  z     Pic   

1B998 - Unmarked Cutting-Block Plane, used to true up the cutting blocks
in the glove-cutting business in Gloversville, NY. The plane was probably made
here in Gloversville, (perhaps by Curtin-Hebert Co., Inc.), was used
for several generations of glove-shop operators. Plane is 21 1/2 inches long
and 3 1/2 inches wide, with a 7/16-inch cutter.
There is a slight crack in the part that holds the cutter, but it does not appear
to affect use of the plane.  (See also Smith's Patented ....Planes, Vol II, Page 121)
{price = $30.00 plus ship (it's heavy)} lf          Pic     Pic     

 


Rules  

 


Shaves  

 

23BSH-2 - Chamfer Spoke Shave, No 65, by Kunz, in Good++ condition.
{price = $38.00 plus shipping}  lf     Pic

23BSH-4 - Spoke Shave, curved cutter, marked L. Bailey, Boston,
in Good condition, missing most of its japanning.
{price = $40.00 plus shipping}  lf    

33CS-12 - Hand Beader, #66, by Stanley (T-1), in Good+ condition.
Japanning approximately 95%.  Includes two guides and 9 cutters.
{price = $165.00 plus shipping}  z     Pic

33CS-13 - Hand Beader, #66, by Stanley, in Good+ condition.
Chrome approximately 95%.  Includes two guides and 9 cutters.
{price = $145.00 plus shipping}  z     Pic

26BS-2 - Hand Beader, #66, by Stanley (T-1), in Good condition.
Japanning about 80%.
Includes one guide and 6 cutters.
{price = $95.00 plus shipping  lf     No Pic

33CS-14 - Universal Spoke Shave, #67, by Stanley, in Good+ condition. 
Finish at about 75%.  Noting a split in the metal ferrule (still tight)
on the left handle.  Blade full size.

{price = $75.00 plus shipping}  lf    Pic     Pic

*     *     *     *     *     *

55HSS06 - Spoke Shave, #60, by Stanley, in Good+ condition.
{price = $25.00 plus shipping} lf      Pic  

55HSS08 - Spoke Shave, #60, by Stanley, in Good+ condition.
{price = $30.00 plus shipping} lf      Pic  

  


Squares  

 

23BBS-3 - Bevel Square, 8", Brass & Rosewood, by Sargent (unmarked),
in Good+ condition.
{price = $28.00 plus shipping}  lf     Pic

 

*     *     *      *      *      *     *

55HSQ06 - Bevel, #25, 6", by Stanley, in Good+ condition.
{price = $15.00 plus shipping} lf     Pic  

9W562 - Bevel, Slide, #18, 6", by Stanley, in Good+ condition.
{price = $20.00 plus shipping}  lf     

Hey. You were right. They're really nice.
Thanks,  G. 2015   


All Other Tools 

26BT -   Iron Traveler, by Wiley and Russell, in Good+ condition.
{price = $57.00 plus shipping}  lf     Pic     Pic
   

23BT-1 - Tool Handle, #305, 9 tools, by Stanley R&L, in Good+ condition.
{price = $40.00 plus shipping}  z     Pic

23BT-2 - Tool Handle, 8 tools, by Buell Bros., in Good+ condition.
{price = $35.00 plus shipping}  lf     Pic

23BT-3 - Tool Handle, 9 tools, by Millers Falls, in Good+ condition.
{price = $40.00 plus shipping}  lf     Pic

23BT-4 - Tool Handle, 5 tools, by Millers Falls, in Good+ condition.
{price = $35.00 plus shipping}  lf     Pic

33CS-15 - Stanley #1, Odd Jobs, by Stanley, in Good+ condition. 
Missing original Rule. (4-fold included).
Finish is  about 70%.
{price = $75.00 plus shipping}  lf     Pic


*     *     *     *     *     *     *     *

9W551 - Chisel Grinder No. 200, by Stanley, in Good+ condition.
{price = $67.00 plus shipping} lf      Pic      Pic

22CF - Skate Sharpener by unmarked maker.  I do not recognize this brand. 
Simple design. Good+
{price = $15.00 plus shipping} lf    Pic

33CM-10 - Bench Vise, unmarked by maker, in Good+ condition. 
Interesting design.
{price = $45.00 plus shipping}  lf     Pic     Pic           

 

Hi Walt,
Just a quick note to let you know that I have received the reamer today (Thursday 20thFeb), very prompt service all round – thanks.
The reamer is in great condition and I am very happy with it. It was well packaged and arrived safe and sound.
I very much appreciate the effort you went to.  Steve S., Australia,
2013  

 


Return to Home Page

 

(34)


LITTLE FALLS ANTIQUE CENTER
25 West Mill Street

Little Falls, NY 13365
315-823-4309

toolman@gatctools.com

We always have a fairly extensive inventory of good, useable woodworking tools to suit the needs
of both tradesman and collector. If you don't find what you need on this page,

send an e-mail
. We'll do our best to help you find that tool.

  

 Presently three tool dealers at this location.

 


That just about does it for now. Please send me an e-mail with any selections you would like to purchase.
I haven't gotten fancy with order forms here.
My address again is: toolman@gatctools.com

 

Return to Home Page

 


Web Design Orange County

2887