Old Braces, Drills, Levels, Rules, Shaves for sale

I will list here some tools I have for sale.Whenever possible, I'll link a photo or scan. I can always send you a pic of one of the tools I have not posted a pic for. Some of these tools are located at my retail shop listed at the bottom of this page, so it might take a few days before I can go get them.

If you have questions, you can send an e-mail to me at waltlane@gatctools.com.
Any suggestions will be appreciated and carefully considered.

Note: Shipping will depend on size and weight.  USPS Flat Rate boxes work well for smaller items, especially multiple small items.  Larger items will be shipped via USPS Priority Mail.  I will send you an estimate of the total cost to the best of my ability.

If you wish to pay by check or money order,
send it payable to:
Walt Lane, 3 Pewter Lane, Johnstown, NY 12095.

This is a very long page.  Please keep scrolling down to see:

Braces, Drills, Gauges, Levels, Rules, Shaves, Squares, and Others

Chests

Floats

7W601 - Float, Planemaker's, made from leather tool?,
unmarked, in Good+ condition. 
{price = $30.00 plus shipping}   Z          Pic

7W602 - Float, Planemaker's, 6-inch, unmarked,
from an early chest, neatly repaired handle, in OW Good+ condition.
{price = $35.00 plus shipping}  Z          Pic

Food choppers

53F-01 - Square-edge chopper, 6-inch edge, by Taylor Brothers,
Adelaide Works, Sheffield. The blade and handle are held tight
with four split-nut saw screws as used in their saw-making
operations. Condition is Good++.
{price = $60.00 plus shipping}   Z         Pic

53F-02 - Food Chopper by Universal, L.F. &C. in Good+ condition.
{price = $38.00 plus shipping}   LF      Pic

53F-03 - Food Chopper, double blade, unmarked by maker,
in Good+ condition.
{price = $35.00 plus shipping}   LF      Pic

Gauges, Marking and Mortise  

41A-11- Marking Gauge, Boxwood, unmarked by maker
in Good+ condition.
{price = $20.00 plus shipping)   Z    Pic

41A-13 - Slitting Gauge, Boxwood, unmarked by maker
in Good+ condition.
{price = $20.00 plus shipping}  Z     Pic

53Z-02 - Mortise Gauge, English, Rosewood and Brass,
6 1/2-inch bar, brass strips on face, good points. Good+ condition.
{price = $45.00 plus shipping)    Z      Pic

53Z-01 - Mortise Gauge, Rosewood and Brass, 6 1/2-inch bar,
Brass strips on face, good points. Good+ condition.
{price = $45.00 plus shipping}   Z       Pic

Parts #1 - This Brainard (unmarked) gauge may have been put together
from assorted parts and sent to auction. I was dumb enough to buy it.
The thumb screw is too short to lock it. Even trying to insert a shim
does not appear to be workable.  It's total length is 1 7/16", top to end
of threads.  You might sell me a better thumbscrew (1 1/2") or you might
buy it from me for $25 and fix it up yourself.  Any thoughts?
{price = $20.00 plus shipping}  Z       Pic

Hey Walt, I received the tools today. That mortising gauge is even cooler than I expected.
Thanks again the 9 and a half is quite lovely. Thank you for the super fast shipping and careful packaging as well.
Take care.  N. S.  1/7/16

Levels  

43A-25 - Carpenter's Level, #108?, 10-inch, in Good+ condition.
{price = $20.00 plus shipping}    lf       Pic     Pic

16B-4 - Carpenter's level, #107?, 28-inch, in Good+ condition.
{price = $28.00 plus shipping}   lf       Pic      Pic

51B-06 - Machinist Level #39 1/2, 6-inch, nickel coated,
by Stanley, in Good+ condition.
{price = $25.00 plus shipping}   lf        Pic

Shaves  

Squares  

46A-3 - Try Square, 12-inch, with small split in the handle.
I am researching the company. Nice condition for an older tool.
{price = $25.00 plus shipping}   lf       Pic

7W478 - Try Square, 12-inch, perhaps by W. Cresson, Phila.,
but not marked as such, in Good+ condition.
{price = $36.00 plus shipping)   lf        Pic

7W988 - Bevel Square, 4-inch, No. 25, marked "9-6-04"
by Stanley, in Good+ condition.
{price = $20.00 plus shipping}    lf       Pic     Pic

All Other Tools 

53B-07 - Tool  Handle, 8 tools, unmarked,
in Good+ condition.
{price = $15.00 plus shipping}   Z         Pic

51B-08 - Tool Handle, 10 tools, unmarked,
in Good+ condition.
{price = $15.00 plus shipping}   Z        Pic

*     *     *     *     *     *     *     *

Hi Walt,
Just a quick note to let you know that I have received the reamer today (Thursday 20thFeb), very prompt service all round – thanks.
The reamer is in great condition and I am very happy with it. It was well packaged and arrived safe and sound.
I very much appreciate the effort you went to.  Steve S., Australia, 2013  

Please  Return to Home Page
To see the  rest of my tools