Miscellaneous Tools

Woodworking Planes,  Braces, Drills, Levels, Rules, Shaves and other tools

I will list here some tools I have for sale.Whenever possible, I'll link a photo or scan. I can always send you a pic of one of the tools I have not posted a pic for. Some of these tools are located at my retail shop listed at the bottom of this page, so it might take a few days before I can go get them.

If you have questions, you can send an e-mail to me at toolman@gatctools.com.
Any suggestions will be appreciated and carefully considered.

Note: Shipping will depend on size and weight.  USPS Flat Rate boxes work well for smaller items, especially multiple small items.  Larger items will be shipped via USPS Priority Mail.  I will send you an estimate of the total cost to the best of my ability.

If you wish to pay by check or money order,
send it payable to:
Walt Lane, 3 Pewter Lane, Johnstown, NY 12095.

 

Last updated:  March 18 , 2017

Special Tools

55HN01 - Dental Tools - Approximately 20 early dental tools, an accumulated set.
All are in nice clean condition. 
{Price = $40.00 plus shipping}  z   

 

55HN02 - Surgical Tools - Approximately 20 early surgical tools, an accumulated set.
All are in nice clean condition.
{price = $40.00 plus shipping} z    



This is a very long page.  Please keep scrolling down to see:

Braces, Drills, Gauges, Levels, Planes, Rules, Shaves, Squares, and Others

 


Braces and Bits  

 

25BB-1 - Spofford's Pat. Brace, by Frey & Pigg, Bridgeport, CT, in Good+ condition.
{price = PENDING plus shipping}  z     Pic     Pic

11EB   - Brace, No. 732, 10-inch sweep, by Millers Falls, in Good condition.
{price = $16.00 plus shipping} lf      Pic

9W561 - Brace, No. 723, 10-inch sweep, by Millers Falls, in Good++ condition.
{price = $23.00 plus shipping}  z     Pic

22CA   - Brace No. 915, 10-inch sweep, by Stanley, in Good conditiion.
{price = $21.00 plus shipping} lf     Pic

55HB01 - Brace, No. 923 10-inch sweep, by Stanley, in Good+ condition.
This is the premium model Stanley that accepts both Jennings and Irwin  pattern bits.
{price = $48.00 plus shipping} z       Pic     

9W493 - Brace, No. 923, 10-inch sweep, by Stanley, in Good++ condition. 
A very little used example of  the best-selling premium model Stanley sold with full ratchet,
spring jaws, and ball bearing head, that accepts both Jennings and Irwin  pattern bits.
{price = $68.00 plus shipping} z     Pic  

55HB03 - Brace, Beech, unmarked, in Good+ condition.
{price = $65.00 plus shipping} z      Pic

55HB07 - Hollow Auger, unmarked, in Good+ condition.
{price = $30.00 plus shipping} z       Pic

25BB-2 - Hollow Auger, 1/4" to 1 1/4", by The A.A.Wood & Sons Co., in Good+ condition.
{price = Pending plus shipping}  z     Pic     Pic

25BB-3 - Hollow Auger, 1/4" to 1 1/4", unmarked by maker, in Good+ condition.
{price = $65.00 plus shipping}  lf     Pic     Pic

25BB-4 - Hollow Auger, 1/4" to 1 1/4", by the B.S.V. Co., in Good+ condition.
{price = $65.00 plus shipping}  lf     Pic     Pic

25BB-5 - Hollow Auger, 1/4" to 1 1/4", by the E. C. Stearns Co. Syracuse, NY, in Good+ condition.
{price = $65.00 plus shipping}  z     Pic     Pic

25BB-6 - Spoke Pointer, with depth gauge, unmarked by maker, in Good+ condition.
{price = Pending plus shipping}  lf     Pic     Pic

25BB-7 - Spoke Pointer, no gauge, unmarked, in Good conditon.
{price = $30.00 plus shipping}  lf     Pic     Pic

25BB-8 - Spoke Pointer, with depth gauge, unmarked, in good+ condition.
{price = $45.00 plus shipping}  z     Pic     Pic


Drills

 

25BD-2 - Rusby's Pat Extension Drill, made in Newark, NJ, in Good+ condition.
{price = $68.00 plus shipping}  lf     Pic     Pic

22FY  -   Hand Drill No. 1530 by Yankee, in Good+ condition.
{price = $48.00 plus shipping} lf      Pic     Pic

25BD-1 - Archimedian Drill No. 50 by Yankee, in Good+ condition.
{price = $55.00 plus shipping}  z      Pic    

16PBA - Drill, Hand, No. 94, by Millers Falls, in Good+ condition.
{price = $19.00 plus shipping} lf
     Pic

21LJ  -  Hand Drill No 611, "100 Plus", by Stanley, in Good condition.
{price = $26.00 plus shipping} lf    Pic     Pic  

55HD10 - Jewelers Archimedean Drill, unmarked, in Good+ condition.
{price = $20.00 plus shipping}  z     Pic  

55HD11 - Jewelers Archimedean Drill, unmarked, in Good+ condition.
{price = $25.00 plus shipping}  z     Pic  

55HD13 - Jewelers Archimedean Drill, unmarked, in Good+ condition.
{price = $20.00 plus shipping}  z     Pic  

55HD14 - Jewelers Archimedean Drill, unmarked, in Good+ condition.
{price = $20.00 plus shipping}  z     Pic  


 

 

11S - Dandelion Plucker, 16 inches overall, SOLD

 


Gauges, Marking and Mortise  

 

55HG01 - Gauge, Butt #93 (T-1), by Stanley, in Good+ condition.
{price = $55.00 plus shipping}  z       Pic  

55HG05 - Gauge, Marking #162, by Stanley, in Good+ condition.
{Price = $75.00 plus shipping}   z*       Pic  

55HG13 - Gauge, Mortise (7"), unmarked, in Good+ condition.
{Price = $30.00 plus shipping}   z*       Pic 

25BG-1 - Slitting Gauge (9"), unmarked, in Good+ condition.
{price = $48.00 plus shipping}  z     Pic     Pic  

55HW08 - Panel Gauge, unmarked, in Good+ condition.
{price = $18.00 plus shipping} z     Pic     Pic 

31RM - Gauge, Clapboard No. 89, by Stanley, in Good+ condition.
{price = $45.00 plus shipping} lf       Pic  

Hey Walt, I received the tools today. That mortising gauge is even cooler than I expected.
Thanks again the 9 and a half is quite lovely. Thank you for the super fast shipping and careful packaging as well.
Take care.  N. S.  1/7/16


Levels  

20KL - Carpenter's Plumb and Level, 28", Cherry, w/label, by Stanley, in Good+ condition.
{price = $23.00 plus shipping} l      Pic     Pic 

17MBA - Level, Bit & Square No. 44, by Stanley, in Good+ condition
{price = $48.00 plus shipping} lf     Pic 

55HL16 - Level, 10.5", by Atkin & Sons, in Good+ condition.
{price = $28.00 plus shipping}  z      Pic  
      

55HL21 - Level, 6", by Smallwood, Birmingham, in Good+ condition.
{price = $28.00 plus shipping}  z      Pic  

55HL32 - Level, Adj. Metallic #8, 18", by M.W. Robinson, NY, in Fine condition.
{price = $50.00 plus shipping}  z      Pic  

55HL29 - Level, Carpenters #4, 28", by Davis & Cook, in Good+ condition.
{price = $55.00 plus shipping}  z      Pic  

55HL30 - Level, Carpenters #4, 28", by Davis & Cook, in Good+ condition.
{price = $45.00 plus shipping}  z      Pic  

55HL23 - Level, Carpenter's #0, 24", by Stanley, in Fine condition.
{price = $20.00 plus shipping}  lf      Pic  

55HL35 - Level, Carpenter's #103, 16", by Stanley, in Good+ condition.
{price = $25.00 plus shipping}  lf      Pic  

55HL36 - Level, Carpenter's #104, 12", by Stanley, in Good+ condition.
{price = $20.00 plus shipping}  lf      Pic  

55HL05 - Level, Torpedo, 6", by Parry & Bott Ltd., Birmingham, in Good+ condition.
{price = $26.00 plus shipping}  z       

55HL07 - Level, Torpedo, 10", by Brixton, London, in Good+ condition.
{price = $25.00 plus shipping}  z      Pic  

55HL13 - Level, Torpedo, #590, 9", by Millers Falls, in Good+ condition.
{price = $20.00 plus shipping}  z      Pic  

55HL14 - Level. Torpedo, 9", by W. Marples & Sons, Sheffield, England, in Good+ condition.
{price = $26.00 plus shipping}  z        


 

Planes and such  

 

                          Two booths at the Antique Center   

32CVU - Plane, Block, by Sears Roebuck & Co, in original box with plane catalogue from 1950's.
{price = $28.00 plus shipping} z    Pic  

1B998 - Unmarked Cutting-Block Plane, used to true up the cutting blocks in the glove-cutting business in Gloversville, NY. The plane was probably made here in Gloversville, (perhaps by Curtin-Hebert Co., Inc.), was used for several generations of glove-shop operators. Plane is 21 1/2 inches long and 3 1/2 inches wide, with a 7/16-inch cutter. There is a slight crack in the part that holds the cutter, but it does not appear to affect use of the plane.  (See also Smith's Patented ....Planes, Vol II, Page 121)
{price = $40.00 plus ship (it's heavy)} z          Pic     Pic     

 


Rules  

55HR06 - Folding Rule #68, by Stanley, in Good+ condition.
{price = $15.00 plus shipping} z       Pic  

  


Shaves   

55HSS01 - Spoke Shave, #51, by Stanley, in Good+ condition.
{price = $30.00 plus shipping} z*       Pic  

55HSS05 - Spoke Shave, #60, by Stanley, in Good+ condition.
{price = $40.00 plus shipping} z*       Pic  

55HSS06 - Spoke Shave, #60, by Stanley, in Good+ condition.
{price = $45.00 plus shipping} z*       Pic  

55HSS07 - Spoke Shave, #60, by Stanley, in Good+ condition.
{price = $45.00 plus shipping} z*       Pic  

55HSS08 - Spoke Shave, #60, by Stanley, in Good+ condition.
{price = $45.00 plus shipping} z*       Pic  

55HSS12 - Edge Plane, by Snell-Atherton, in Good+ condition. (Short blade)
{price = $20.00 plus shipping} z*       Pic  

55HSS13 - Edge Plane, by J.P. Hyde, in Good+ condition. (Full blade)
{price = $20.00 plus shipping} z*       Pic  


Squares  

55HSQ03 - Try Square, #20, 10", by Stanley, in Good+ condition.
{price = $15.00 plus shipping} lf    Pic      (Made in Canada)  

55HSQ06 - Bevel, #25, 6", by Stanley, in Good+ condition.
{price = $20.00 plus shipping} z      Pic  

55HSQ07 - Bevel, #25, 6", by Stanley, in Good+ condition.
{price = $20.00 plus shipping} lf     Pic  

55HSQ11 - Bevel, Slide, by Angelus, in Good+ condition.
{price = $25.00 plus shipping} lf     Pic  

9W562 - Bevel, Slide, #18, 6", by Stanley, in Good+ condition.
{price = $40.00 plus shipping}  z       

 

Hey. You were right. They're really nice.
Thanks,  G. 2015   


All Other Tools  

9W551 - Chisel Grinder No. 200, by Stanley, in Good+ condition.
{price = $95.00 plus shipping} lf      Pic      Pic

9W547 - Box Scraper No. 70, by Stanley, in Good+ condition.
{price = $25.00 plus shipping} lf     Pic  

25BA-2 - Jeweler's Anvil, by Brookstone, France, in Good+ condition.
{price = $30.00 plus shipping}  z     Pic     Pic

25BA-3 - Jeweler's Anvil, unmarked, in Good+ condition.
{price = $25.00 plus shipping}  lf     Pic     Pic

25BS-20 - Screw Turn, 12", marked #317, in Good+ condition.
{price = $18.00 plus shipping}  lf     Pic    

73ML-1 - Screwdriver No. 64, by Stanley Rule & Level Co. in Good condition (see pic).
{price = $15.00 plus shipping} z     Pic
     

51PHZ33 - Screwdriver, unmarked by maker, (marked "Pat.Appl'd For" on brass ferrule) in Good+ condition.  Reverse spiral is inside the standard spiral.  Several splits in ferrule. Interesting design.
{price = $28.00 plus shipping}
z     Pic     Pic
   

55HW06 - Book Press, unmarked, in Good+ condition.
{price = $55.00 plus shipping} z     Pic
     Pic  

55HW07 - Router, D, unmarked, in Good+ condition.
{price = $40.00 plus shipping} lf     Pic     Pic  

55HW25 - Scorp, 3" oval, 12" handle, unmarked, in Good condition.
{price = $35.00 plus shipping} lf     Pic  

55HW26 - Scorp, 2.5" oval, 10" handle, unmarked, in Good condition.
{price = $35.00 plus shipping} z     Pic  

55HW28 - Auger Handle, unmarked, in Good+ condition.
{price = $25.00 plus shipping} lf     Pic

25BV-1 - Hand Vise, No. 3, new in box, by Millers Falls, in Good++ condition.
{price = $35.00 plus shipping}  z     Pic    

25BV-2 - Hand Vise, No. 3, by Millers Falls, in Good+ condition.
{price = $20.00 plus shipping}  lf     Pic

25BV-3 - Bench Vise, up to 2-inch opening, unmarked, in Good+ condition.
{price = $20.00 plus shipping}  lf     Pic     Pic

25BV-5 - Hand Vise, 4", unmarked, in Good+ condition.
{price = $18.00 plus shipping}  lf     Pic    

25BV-7 - Hand Vise, 5.5", marked Hooker, in Good+ condition.
{price = $22.00 plus shipping}  z     Pic    

22CF - Skate Sharpener by unmarked maker.  I do not recognize this brand.  Simple design. Good+
{price = $23.00 plus shipping} lf    Pic           

 

Hi Walt,
Just a quick note to let you know that I have received the reamer today (Thursday 20thFeb), very prompt service all round – thanks.
The reamer is in great condition and I am very happy with it. It was well packaged and arrived safe and sound.
I very much appreciate the effort you went to.  Steve S., Australia,
2013  

 


Return to Home Page

 

(34)


LITTLE FALLS ANTIQUE CENTER
25 West Mill Street

Little Falls, NY 13365
315-823-4309

toolman@gatctools.com

We always have a fairly extensive inventory of good, useable woodworking tools to suit the needs
of both tradesman and collector. If you don't find what you need on this page,

send an e-mail
. We'll do our best to help you find that tool.

 

(My neighbor's booth next door)  

 Presently three tool dealers at this location.

 


That just about does it for now. Please send me an e-mail with any selections you would like to purchase.
I haven't gotten fancy with order forms here.
My address again is: toolman@gatctools.com

 

Return to Home Page

 


Web Design Orange County

2887